FLATTENED TUBULAR BRAIDS

FLATTENED TUBULAR BRAIDS These braids are in rectangular shape and normally very thin. They are used to join different masses or they are cut and tubes or cable terminals are placed to obtain shunts to be used in the panel, link, converter compartment, etc.   Sunenergy System S.L has developed and manufactures a wide range […]

ESY AND ESUY BRAIDED CABLES

esy and esuy braides cables These cables are manufactured for grounding circuits in the railway sector and for high and medium voltage grounding. They are extra flexible connection braids, made of red or tinned copper and covered with translucent PVC. On request, they can also be made without PVC or silicone coatings or without shielding, […]

FLAT GROUNDING BRAIDS

flat grounding braids The grounding braids (or taps) may be made up of one or more lengths of flattened tubular braids, the ends of which are fitted with subsequently pressed and drilled tinned copper tubes or cable lugs. They can be manufactured in both red or tinned copper, with the required dimensions and finished with […]

COMPACT BYPASSES OR SHUNTS

compact bypasses or shunts They are manufactured using round or square braids that are cut into lengths and electrically compacted on both sides. This compaction can be in square or rectangular shape. They are used in the lighting industry, in the electrical sector and in low voltage switchboards. The manufacture is carried out exclusively on […]

FLAT ALUMINUM BRAIDS

flat aluminum braids Prepared for the same use as similar copper items, even if they are produced with a higher section to guarantee equal grounding in high and medium voltage. Sunenergy System S.L manufactures aluminum braids with elemental wire from 0.20mm to 0.30mm; min cross section 10 mmq, max. 150 mmq. similar products

TUBULAR COPPER BRAIDS

tubular cooper braids Tubular braids are commonly called “half”. This type of braids are empty inside and are used for covering and splicing cables and pipes in the energy compartment, with the possibility of inserting diameters from 1 mm to max. 30 mm. Manufactured with a rectangular section and flattened at the request of the […]

SQUARE COPPER BRAIDS

square copper braids Much more flexible than round braids, even due to their particular double eight-shaped pattern. They do not open when cut and after continuous bending they return to their original shape. They are especially used in low and medium voltage circuit breakers. Upon request, they can be manufactured in a square shape or […]

ROUND COPPER BRAIDS

round copper braids Unlike square braids, these have the advantage of not opening after cutting, as well as offering greater flexibility. They are directly braided to a round shape and can be made in either red copper or tinned copper. They are used for special coatings and are installed in subway and railway stations. It […]

COPPER WIRES AND BRAIDS

copper wires and braids Copper wires and braids are used for the production of low and high voltage electrical cables for situations where there are vibrations and shocks, since they allow connections between moving parts. They are made of red or tinned copper with subsequent coating (PVC, polyurethane, silicone, FEP, Teflon, etc.), using two different […]

HELICAL COPPER BRAIDS

helical copper braids Manufactured according to DIN 46438, with red or tinned copper wires. The braids are made up of more “braids”, even forming a concentric braid (1+6). They have a very firm surface and a regular diameter.. In addition to the use in the production of electrical cables, they are used to produce water-cooled […]